CCIE Wirless V3.1

1.1 Describe WLAN organizations and regulations

1.2 Describe IEEE 802.11 standards and protocols

1.3 Plan & design wireless solutions requirements

• 1.3.a Translate customer requirements into services and design recommendations
• 1.3.b Identify ambiguity and/or information gaps
• 1.3.c Evaluate interoperability of proposed technologies against deployed IP network infrastructure & technologies
• 1.3.d Select an appropriate deployment model
• 1.3.e Regulatory domains and country codes

1.4 RF planning, designing and validation

• 1.4.a RF Design / Site survey
  • 1.4.a [i] Define the tasks/goals for a preliminary site survey
  • 1.4.a [ii] Conduct the site survey
  • 1.4.a [iii] Determine AP quantity, placement and antenna type
• 1.4.b Architect indoor and outdoor RF deployments
  • 1.4.b [i] Coverage
  • 1.4.b [ii] Throughput
  • 1.4.b [iii]Voice
  • 1.4.b [iv]Location
  • 1.4.b [v] High Density / Very High Density
• 1.4.c Construct an RF operational model that includes:
  • 1.4.c [i] Radio resource management (Auto-RF, manual, hybrid, Flexible Radio Assignment, TPC and DCA)
  • 1.4.c [ii] Channel use (radar, non-WiFi interference, Dynamic Bandwidth Selection)
  • 1.4.c [iii] Power level, overlap
  • 1.4.c [iv] RF profiles
• 1.4.d Validate implemented RF deployment

2.1 Configure and troubleshoot wired infrastructure to support WLANs

• 2.1.a VLANs
• 2.1.b VTP
• 2.1.c STP
• 2.1.d Etherchannel

2.2 Plan network infrastructure capacity

2.3 Configure and troubleshoot network connectivity for:

• 2.3.a WLAN clients
• 2.3.b WLCs (appliance, virtual, and Mobility Express)
• 2.3.c Lightweight APs
• 2.3.d Autonomous APs

2.4 Configure and troubleshoot PoE for APs

2.5 Configure and troubleshoot QoS on the switching infrastructure

• 2.5.a MQC
• 2.5.b MLS QoS

2.6 Configure and troubleshoot multicast on the switching infrastructure

• 2.6.a PIM
• 2.6.b Basic IGMP (including IGMP snooping)
• 2.6.c MLD

2.7 Configure and troubleshoot IPv4 connectivity

• 2.7.a Subnetting
• 2.7.b Static and inter-VLAN routing

2.8 Configure and troubleshoot basic IPv6 connectivity

• 2.8.a Subnetting
• 2.8.b Static and inter-VLAN routing

2.9 Configure and troubleshoot wired security for APs

• 2.9.a MAB
• 2.9.b dot1X for APs

2.10 Configure and troubleshoot the following to support wireless services

• 2.10.a DNS
• 2.10.b DHCPv4 / DHCPv6
• 2.10.c NTP, SNTP
• 2.10.d SYSLOG
• 2.10.e SNMP
• 2.10.f CDP, LLDP
• 2.10.g mDNS (including SDG)

3.1 Configure and troubleshoot different modes and roles

• 3.1.a WGB
• 3.1.b Point to point & Point to multi-point bridge

3.2 Configure and troubleshoot SSID/MBSSID

3.3 Configure and troubleshoot security

• 3.3.a L2 security policies
• 3.3.b Association filters
• 3.3.c Local radius
• 3.3.d dot1X profiles

3.4 Configure and troubleshoot radio settings

3.5 Configure and troubleshoot multicast

3.6 Configure and troubleshoot QoS

4.1 Configure and troubleshoot secure management access and control plane

• 4.1.a AAA
• 4.1.b CPU ACLs
• 4.1.c Management via wireless interface
• 4.1.d Management via dynamic interface

4.2 Configure and troubleshoot interfaces

4.3 Configure and troubleshoot lightweight APs

• 4.3.a dot1x
• 4.3.b AP modes
• 4.3.c AP authentication / AP authorization
• 4.3.d Logging
• 4.3.e Local AP CLI configuration
• 4.3.f WLC based AP configuration

4.4 Configure and troubleshoot high availability and redundancy

• 4.4.a SSO
• 4.4.b N+1, N+N

4.5 Configure and troubleshoot wireless segmentation

• 4.5.a RF profiles
• 4.5.b AP groups
• 4.5.c FlexConnect

4.6 Configure and troubleshoot wireless security policies

• 4.6.a WLANs
• 4.6.b L2/L3 security
• 4.6.c Rogue policies
• 4.6.d Local EAP
• 4.6.e Local profiling
• 4.6.f ACLs
• 4.6.g Certificates

4.7 Configure and troubleshoot FlexConnect and Office Extend

4.8 Configure and troubleshoot Mesh

4.9 Implement RF management

• 4.9.a Static RF management
• 4.9.b Automatic RF management
• 4.9.c CleanAir
• 4.9.d Data rates
• 4.9.e RX-SOP
• 4.9.f Air Time Fairness (ATF)
• 4.9.g Flexible Radio Assignment (FRA)

4.10 Configure and troubleshoot mobility

• 4.10.a L2/L3 roaming
• 4.10.b Multicast optimization
• 4.10.c Mobility group scaling
• 4.10.d Inter-release controller mobility
• 4.10.e Mobility anchoring

4.11 Configure and troubleshoot multicast

4.12 Configure and troubleshoot client roaming optimization

• 4.12.a CCKM
• 4.12.b Optimized Roaming
• 4.12.c Band Select
• 4.12.d Load Balancing
• 4.12.e 802.11r/k/v

5.1 Configure and troubleshoot identity management

• 5.1.a Basic PKI for dot1x and WebAuth
• 5.1.b External identity sources (AD)

5.2 Configure and troubleshoot AAA policies

• 5.2.a Client authentication and authorization
• 5.2.b Management authentication and authorization
• 5.2.c Client profiling and provisioning
• 5.2.d RADIUS attributes
• 5.2.e CoA

5.3 Configure and troubleshoot wireless guest management

• 5.3.a Local web authentication
• 5.3.b Central web authentication
• 5.3.c Basic sponsor policy

6.1 Configure and troubleshoot management access

• 6.1.a AAA
• 6.1.b Virtual domain

6.2 Perform basic operations

• 6.2.a Create and deploy templates
• 6.2.b Operate maps
• 6.2.c Import infrastructure devices
• 6.2.d High availability
• 6.2.e Audits
• 6.2.f Client troubleshooting
• 6.2.g Notification receivers
• 6.2.h Reports
• 6.2.i Monitoring policies

6.3 Configure and troubleshoot Prime Infrastructure jobs

6.4 Operate Security management

• 6.4.a Configure rogue management
• 6.4.b Manage alarms and events

6.5 Implement and troubleshoot MSE/CMX

• 6.5.a Management access
• 6.5.b Network services
  • 6.5.b [i] Location
  • 6.5.b [ii] Analytics
  • 6.5.b [iii] Connect and Engage
  • 6.5.b [iv] CleanAir
  • 6.5.b [v] wIPS
• 6.5.c NMSP

6.6 Integrate ISE with Prime Infrastructure and MSE/CMX

7.1 Configure and troubleshoot voice over wireless

• 7.1.a QoS profiles
• 7.1.b EDCA
• 7.1.c WMM
• 7.1.d BDRL
• 7.1.e Admission control
• 7.1.f MQC/MLS

7.2 Configure and troubleshoot video and media

• 7.2.a Media Stream
• 7.2.b Admission control

7.3 Configure and troubleshoot mDNS

• 7.3.a mDNS proxy
• 7.3.b Service discovery
• 7.3.c Service filtering

7.4 Configure and troubleshoot AVC and netflow

7.5 Configure and troubleshoot FastLane and Adaptive Fast Transition (802.11r)

8.1 Cloud

• 8.1.a Compare and contrast Cloud deployments models
  • 8.1.a [i] Infrastructure, platform, and software services (XaaS)
  • 8.1.a [ii] Performance and reliability
  • 8.1.a [iii] Security and privacy
  • 8.1.a [iv] Scalability and interoperability
• 8.1.b Describe Cloud implementations and operations
  • 8.1.b [i] Automation and orchestration
  • 8.1.b [ii] Workload mobility
  • 8.1.b [iii] Troubleshooting and management
  • 8.1.b [iv] OpenStack components

8.2 Network programmability [SDN]

• 8.2.a Describe functional elements of network programmability (SDN) and how they interact
  • 8.2.a [i] Controllers
  • 8.2.a [ii] APIs
  • 8.2.a [iii] Scripting
  • 8.2.a [iv] Agents
  • 8.2.a [v] Northbound vs. Southbound protocols
• 8.2.b Describe aspects of virtualization and automation in network environments
  • 8.2.b [i] DevOps methodologies, tools and workflows
  • 8.2.b [ii] Network/application function virtualization (NFV, AFV)
  • 8.2.b [iii] Service function chaining
  • 8.2.b [iv] Performance, availability, and scaling considerations

8.3 Internet of Things

• 8.3.a Describe architectural framework and deployment considerations formInternet of Things (IoT)
  • 8.3.a [i] Performance, reliability and scalability
  • 8.3.a [ii] Mobility
  • 8.3.a [iii] Security and privacy
  • 8.3.a [iv] Standards and compliance
  • 8.3.a [v] Migration
  • 8.3.a [vi] Environmental impacts on the network